The vmd application from OpenBSD has been adjusted to work on macOS. This version uses the Apple Hypervisor Framework, which came with macOS Big Sur.

This tool is like SimpleVM and vftool, but followes the vmd/vmctl syntax.

• macOS >= 11.0

make

To start the VM in verbose mode:

./vmctl -v start -cb vmlinuz \
	-i initrd.gz \
	-k "console=hvc0 root=/dev/vda" \
	-d disk.img \
	-l 01:23:45:67:89:ab \
	-m 1g \
	-p 1 \
	vm_name

This will automatically spawn a new console session to interact with the guest.

Multiple disks can be attached by repeating the -d flag.

The -l flag can be used to specify the link layer address (MAC address). This should be specified as six colon-separated hex values.

To shutdown a running VM press CTRL+C in the terminal, or send the SIGINT signal. When a cu session is still running, first enter ~., and then CTRL+C. Keep repeating the signal to forcefully shutdown the VM.

The program cu is used to facilitate the console. When the -c flag has been used with vmctl, then the console will automatically open. The uucp directory must be writable, which can be fixed with:

sudo chmod 775 /var/spool/uucp/
sudo chgrp staff /var/spool/uucp/

If cu doesn't respond to ~ commands, make sure to enter CTRL+D first.

Currently, only Linux guests are supported due to the framework limitations. Not all distributions support the virtio console out of the box (like Debian). Make sure to boot these systems with console=tty1, so you can add the required modules to /etc/initramfs-tools/modules:

virtio
virtio_pci
virtio_blk
virtio_net
virtio_console

After changing the modules file re-create the initramfs image:

update-initramfs -u

Copy the new initramfs image to the host, and then you should be able to use the virtio console (hvc0).