computer hacks

1381 Articles

computer hacks

ATTiny85 as fan controller

An ATTiny GPU Fan Controller That Sticks

August 2, 2025 by 5 Comments

When your GPU fan goes rogue with an unholy screech, you either shell out for a new one or you go full hacker mode. Well, [ashafq] did the latter. The result is a delightfully nerdy fan controller powered by an ATTiny85 and governed by a DS18B20 temperature sensor. We all know a silent workstation is golden, and there’s no fun in throwing money at an off-the-shelf solution. [ashafq]’s custom build transforms a whiny Radeon RX 550 into a cool, quiet operator. Best of all: it’s built from bits likely already in your junk drawer.

To challenge himself a bit, [ashafq] rolled his own temperature-triggered PWM logic using 1-wire protocol on an ATtiny85, all without libraries or bloated firmware. The fan’s speed only ramps up when the GPU gets toasty, just like it should. It’s efficient and clever, and that makes it a fine hack. The entire system runs off a scavenged 12V fan. He could have used a 3D printer, but decided to stick onto the card with double-sided tape. McGyver would approve.

The results don’t lie: idle temps at 40 °C, load peaking at 60 °C. Quieter than stock, smarter than stock, and way cheaper too. The double-sided tape may not last, but that leaves room for improvement. In case you want to start on it yourself, read the full write-up and feel inspired to build your own. Hackaday.io is ready for the documentation of your take on it.

Modifying fans is a tradition around here. Does it always take a processor? Nope.

A Proper Computer For A Dollar?

August 1, 2025 by 26 Comments

When a tipster came to us with the line “One dollar BASIC computer”, it intrigued us enough to have a good look at [Stan6314]’s TinyBasRV computer. It’s a small PCB that forms a computer running BASIC. Not simply a microcontroller with a serial header, this machine is a fully functioning BASIC desktop computer that takes a PS/2 keyboard and a VGA monitor. Would that cheap price stand up?

The board uses a CH32 microcontroller, a RISC-V part that’s certainly very cheap indeed and pretty powerful, paired with an I2C memory chip for storage. The software is TinyBASIC. There’s some GPIO expandability and an I2C bus, and it’s claimed it can run in headless mode for a BASIC program to control things.

We haven’t added up all the parts in the BoM to check, but even if it’s not a one dollar computer it must come pretty close. We can see it could make a fun project for anyone. It’s certainly not the only small BASIC board out there, it’s got some competition.

Thanks [Metan] for the tip.

Closeup of WOPR interface on Raspberry Pi

Rebooting WarGames‘ WOPR With A Pi And Gemini

July 30, 2025 by 4 Comments

WarGames fans, rejoice: [Nick Bild] has rebooted WOPR for real. In his latest hack, the Falcon, he recreates the iconic AI from the 1983 film using a Raspberry Pi 400, a vintage SP0256-AL2 speech chip from General Instrument, and Google’s Gemini LLM. A build to bring us back to the Reagan-era.

Where most stop at visual homage, this one simulates true interaction. The Python script acts as dungeon master for Gemini 2.5 Flash, guiding it to roleplay as the WOPR computer. Keypress sounds click-clack in synchrony with every input. Gemini replies are filtered into allophones, through GI-Pi, [Nick]’s own Python library. The SP0256 then gives it an eerily authentic robotic voice, straight out of 1983.

[Nick] himself is no unfamiliar name to Hackaday. Back in 2020, he hosted a Hack Chat where he talked us through getting from ideas to prototype builds. He practices what he preaches, since he carried out projects like a breadboard 6502 computer, home-automation controlling AI sunglasses, and more silly inventions, like dazzle-proof glasses.

So… shall we play a game? If you’ve ever longed to chat with an 80s military AI about thermonuclear war or tic-tac-toe without doubting you end the world in a blink, start on this build.

Continue reading “Rebooting WarGames‘ WOPR With A Pi And Gemini” →

The Epochalypse: It’s Y2K, But 38 Years Later

July 22, 2025 by 44 Comments

Picture this: it’s January 19th, 2038, at exactly 03:14:07 UTC. Somewhere in a data center, a Unix system quietly ticks over its internal clock counter one more time. But instead of moving forward to 03:14:08, something strange happens. The system suddenly thinks it’s December 13th, 1901. Chaos ensues.

Welcome to the Year 2038 problem. It goes by a number of other fun names—the Unix Millennium Bug, the Epochalypse, or Y2K38. It’s another example of a fundamental computing limit that requires major human intervention to fix. 

Continue reading “The Epochalypse: It’s Y2K, But 38 Years Later” →

a Coleco Adams console on a desk

Coleco Adam: A Commodore 64 Competitor, Almost

July 21, 2025 by 66 Comments

For a brief, buzzing moment in 1983, the Coleco Adam looked like it might out-64 the Commodore 64. Announced with lots of ambition, this 8-bit marvel promised a complete computing package: a keyboard, digital storage, printer, and all for under $600. An important fact was that it could morph your ColecoVision into a full-fledged CP/M-compatible computer. So far this sounds like a hacker’s dream: modular, upgradeable, and… misunderstood.

The reality was glorious chaos. The Adam used a daisy-wheel printer as a power supply (yes, really), cassettes that demagnetized themselves, and a launch delayed into oblivion. Yet beneath the comedy of errors lurked something quite tempting: a Z80-based system with MSX-like architecture and just enough off-the-shelf parts to make clone fantasies plausible. Developers could have ported MSX software in weeks. Had Coleco shipped stable units on time, the Adam might well have eaten the C64’s lunch – while inspiring a new class of hybrid machines.

Instead, it became a collector’s oddball. But for the rest of us, it is a retro relic that invites us to ponder – or even start building: what if modular computing had gone mainstream in 1983?

8 Bit Mechanical Computer Built From Knex

July 20, 2025 by 24 Comments

Long before electricity was a common household utility, humanity had been building machines to do many tasks that we’d now just strap a motor or set of batteries onto and think nothing of it. Transportation, manufacturing, agriculture, and essentially everything had non-electric analogs, and perhaps surprisingly, there were mechanical computers as well. Electronics-based computers are far superior in essentially every way, but the aesthetics of a mechanical computer are still unmatched, like this 8-bit machine built from K’nex.

Continue reading “8 Bit Mechanical Computer Built From Knex” →

One ROM to rule them all.

Software Defined Retro ROMs

July 19, 2025 by 6 Comments

Here’s something fun from our hacker [Piers]: Software Defined ROMs.

In this series of three videos, [Piers] runs us through what a software defined ROM is, how to make them, and then how to use them.

As [Piers] explains, one frustration a retro technician will face is a failed ROM chip. In the era he’s interested in, there are basically three relevant kinds of ROM chip, all 24-pin Dual Inline Package (DIP):

  • 2364 ROM chip: 8KB; 1x chip-select line
  • 2332 ROM chip: 4KB; 2x chip-select lines
  • 2316 ROM chip: 2KB; 3x chip-select lines

Continue reading “Software Defined Retro ROMs” →